1、 Energy saving and sound insulation

The thermal conductivity of synthetic resin tiles is 0.325 w/m.k, which is approximately 1/3 of that of clay tiles, 1/5 of that of 10mm thick cement tiles, and 1/2000 of that of 0.5mm thick color steel tiles. Without considering the addition of insulation layer, the insulation performance of the tile can still achieve better results. The experiment of phoneme measurement shows that tile can absorb noise well when exposed to rainstorm, hail, strong wind and other external influences.

2、 Good impact and low temperature resistance

A 1kg steel ball falls freely from a height of 1.5 meters onto the tile surface without cracking. After 10 freezing cycles, there were no hollowing, bubbles, peeling, or cracking phenomena in the tile.

3、 Long lasting color

This synthetic resin tile can maintain its color stability even after long-term exposure to ultraviolet rays, moisture, heat, cold, and impact. After 6000 hours of artificial aging testing by the National Chemical Building Materials Testing Center, the test result △ E=3.4.

4、 Excellent load resistance

Through testing by the National Building Materials and Component Quality Supervision Station, it was found that the product was not damaged despite a weight increase of 150kg at a support interval of 750mm.

5、 Excellent self waterproofing performance

The high weather resistance resin used for synthetic resin tiles is dense and does not absorb water, and there is no problem of microporous water leakage. The single sheet area of synthetic resin tiles is large, with few roof joints and tight overlap, which can eliminate the need for a waterproof layer.

6、 Lightweight

Synthetic resin tiles weigh 5.9kg per square meter and are a lightweight material. There is no need to install too many steel structures, and the load-bearing requirements for walls and foundations are small.

7、 Self cleaning

The product itself is not suitable for adsorbing dust. Once washed away by rainwater, it will be clean as new and will not have the phenomenon of being washed away with dirt and stains.

8、 Excellent corrosion resistance performance

This product can resist corrosion from various chemical substances such as acid, alkali, salt, etc. for a long time, and will not be affected by rain and snow erosion, resulting in performance degradation.

9、 Strong fire resistance

The main resin of this product is a flame-retardant product, and its fire resistance has been tested by the national fire prevention authority to reach B1 level.

10、 Stable volume

The expansion coefficient of synthetic resin tiles is 4.93 × 10-5 (1/℃), and they have biaxial tensile properties in geometric design. Even if the temperature changes greatly, the expansion and contraction of the tiles can be absorbed by themselves, ensuring the stability of the geometric dimensions of the tiles.

11、 Insulation

Another technical feature of this product is that it is non-conductive and will remain intact even in the event of accidental discharge.

12、 Easy installation

This product only needs to be fixed on the steel sandalwood with screws, and supplemented with accessories such as main ridges and diagonal ridges, which can be durable and have a service life of over 35 years.

It can be seen that synthetic resin tiles, as an excellent tile category, have great prospects, and it is also necessary to choose excellent synthetic resin tile equipment.