1. Generally, recycled particles contain a lot of residue, which often weakens many characteristics compared to raw materials, such as poor color and easy decolorization due to impurities; The bottom is not smooth enough, and there are also uneven particles of feline plague that are widely distributed, which means it is made from purchased materials.

When ignited, there is a pungent odor that can be harmful to the body. Sichuan resin tiles produced using purchased materials have a dull color tone and are prone to small black spots on the appearance, making them very brittle and have a short service life.

2. By observing whether the structural layer and the bottom layer of the synthetic resin tile are smooth and symmetrical, some manufacturers have not adjusted their machines in a timely manner due to their recent establishment, or have used production line equipment with a long service life that has been updated and replaced by large factories to produce, resulting in uneven pressing surfaces of the synthetic resin tile.

3. Put it in the soil and use your foot to step on the wave soldering test. Synthetic resin tiles of the same thickness are not good if they are too soft or too hard. Due to the excessive addition of plasticizers, the construction of such tile projects is unsafe, and the level of brittleness will also be rapid, making it very easy to have dents and other issues after installation.

Too hard is due to the addition of too much stone and plastic, which makes the tile too brittle and very easy to crack. For this, it was not easy to consider at one point. To put it simply, it is best not to choose synthetic resin tiles that have cracks or cannot be immediately restored to normal when they are wave welded onto a flat surface. Cracks indicate excessive addition of stone and plastic, and the inability to restore normalcy in an instant suggests excessive addition of plasticizers.

4. Sichuan resin tiles with high cost-effectiveness, after being baked with an open flame, do not ignite when leaving the ignition source (with a flame retardant rating of B1), resulting in a small amount of white smoke. Fake synthetic resin tiles cause a lot of irritating odors and smoke when baked, and they ignite again after leaving the fire source.